How to Choose & Use Car Mirrors


How to Choose & Use Car Mirrors

In modern times, automotive rear view mirrors are highly influenced by technology. You will find fantastic designs you can't imagine in the car's rear view mirrors, as well as wonderful choices to choose from.

Car rear view mirrors are often damaged in an accident, loosened due to installation errors, or in the case of exterior mirrors, pits appear due to road hazards. When you need to change the car's rear view mirror, knowing the different types of rear view mirrors can save you time and benefit your budget.

Each car has two main rear view mirrors, and you can't drive safely without the rear view mirror. They are rear and side or side mirrors designed to minimize blind spots on the driver's side.

Rear view mirrors, also known as rear wide screens, are used in all cars. These rear view mirrors provide the driver with additional visibility and perception without having to remove the line of sight from the road ahead. They are usually mounted on the top of the front windshield but have the flexibility of rotation. In fact, your rear view mirror is more than just a mirror – it has two reflective surfaces. With it, the driver can see the back through the backlight of the vehicle. The canopy design may be the most commonly used design in rear view mirrors, and the canopy mirrors are mandatory in most areas. The best field of view of the rear view mirror is the object directly behind the driver and the opposite side. The blind spot is usually 90 to 30 degrees behind the driver.

Side mirrors, called wing mirrors, are used to view the rear of the car and to observe the sides of the car. They have usually located outside the car near the front door support "A" column. This type of mirror is mandatory and only applies to vehicles on the driver's side, but most car manufacturers place them on both sides of the vehicle today. They have similar blind spots to the overhead mirror at a 30-degree angle.

When replacing the mirrors, be sure to select the mirrors that have the same mounting system as the original mirrors. Determine the year, brand and model of the vehicle, and how the mirrors can be adjusted, whether from outside or inside the vehicle or with electric mirrors with electrical connections. Choose the type, location, and finish of the mirror. For the surface finish of the mirror, you can choose smooth black, textured black, chrome or stainless steel.

For your rear view mirror replacement, you can consider a lot of features. These features are designed to handle different issues. For example, strong light, strong light reflected from the rear view mirror can cause strong light, which can hinder the driver's vision. It does not appear in sunny conditions. In the evening, your headlights will also have such problematic glare.

To eliminate this phenomenon, designers have created rear view mirrors with anti-glare properties. Anti-glare is produced by a wedge-shaped mirror whose surface is not parallel to the rear mirror, thereby reducing the reflected light. In addition to anti-glare performance, some rear view mirrors also feature automatic dimming to eliminate glare. This rear view mirror has a front view sensor that detects low ambient light behind the car. Moreover, the mirror will automatically dim according to the brightness of the glare.

Once the glare is no longer detected, the mirror will become brighter. This technique is called electrochromism. You can also view the rear seat with an attachment that hangs under the standard rear view mirror. These mirrors are especially useful for parents who want to look after their children in the back seat. To improve the safety of your car driving, you can purchase these small mirrors to reduce blind spots that can be mounted on the dashboard or added to the side view mirror. In addition, you can choose a rear view mirror with a camera. Add more functionality to it with advanced technologies such as compasses, temperature indicators, map lights, and GPS pointing devices.

After knowing how to choose a rear view mirror, how to use the rear view mirror?

Rear view mirrors are not the main point of discussion during driving, but they are the main cause of confluence and lane change accidents. Sometimes they are talked about, but often they get the wrong perception.

If your rear view mirror is not positioned correctly, you may have a large blind spot that is large enough for the truck to enter. Fortunately, however, by learning how to properly position and use the vehicle's rear view mirror, you can completely eliminate blind spots.

First question: Is your mirror position correct?
How to properly adjust the rear view mirror to remove blind spots?

Many drivers think they should be able to see the side of the car while driving. Although you can better see the area next to your car, your side view should tell you what's on the driveway next to you, not just the side of the car when you drive.

Following these steps will help you eliminate most of the vehicle blind spots. Of course, you may still have blind spots. After adjusting the mirror to the correct position, check where the blind spot is.

Driving warning: rear view mirror adjustments will improve your ability to view road conditions. However, it should not be used to check the traffic on your shoulders. You should always look at your shoulders when joining, changing lanes, or making any lateral movements.

  1. Adjust the seat

Before adjusting the vehicle's rear view mirror, make sure your driver's seat is correct. If you do not know how to adjust the position of the seat, please refer to the vehicle manual.

Move the seat back and forth and move up and down (if your car has this adjustment option) to ensure that you can comfortably reach the accelerator pedal, brake pedal and, if necessary, the clutch pedal.

After adjusting the seat, fasten the seat belt before placing the mirror. This will ensure that you are in the same position as you were driving.

Driving warning: Be sure to fasten your seat belt when driving.

  1. Adjust the rearview mirror

Check the position of the mirror each time you get on the bus and every time you change the seat adjustment. Since the vibration of the vehicle can cause the mirror to move a small amount, you may need to adjust the position of the mirror at the beginning of driving.

Driving warning: Adjust the mirror only when the vehicle is stopped. Every time you sit in the driver's seat, check the mirrors.

When you use this mirror if you want to see the rear window as much as you can, use only your eyes, not by turning your head. Sit in the normal driving position and adjust the mirrors slightly until you can see them clearly from the rear window.

For drivers over 6 feet tall: you may need to turn the mirror upside down. This raises the bottom edge of the mirror by a few inches, helping to eliminate the main blind spots.

After the adjustment, you should see:

The road behind you.


A little space on the horizon.

Try to look at the entire back window.


Don't tilt the mirrors to see a wider range of roads. If you want to see a wider range of roads, you should use your side mirrors. The rear view mirror should be able to display a straight, even rear window image.

Driving warning: Check the position of the mirrors every 5-8 seconds. By constantly referring to your rear view mirror, you will know who is surpassing you, who has surpassed you, who is acting behind you occasionally or dangerously. Check the mirror often!

  1. Adjust the side view mirror

If you don't want to see the side of your car, you want to see the car on the driveway next to you. Adjust the side mirrors as follows, which will show you more lanes next to you.

①Driver side window:

To adjust the driver's side mirror, first, rest your head on the driver's side window until it comes into contact with the glass. In this position, adjust the driver's side mirror until you barely see the back corner of the car.

②Passenger side window:

To adjust the passenger-side mirror, tilt the passenger side window the same distance and adjust the side mirror, in the same way, to ensure that you can see a point in the rear corner of the car.

③Side view adjustment:

If you have adjusted your side mirror, sit in a normal position and make some mirror modifications there.

Set the mirror so that it appears in the side view mirror when the passing car disappears from the mirror. Of course, you may need to make some minor adjustments to keep everything organized.


This new location may take a while to get used to, but hopefully, it will greatly expand your horizons and eliminate all your blind spots!


How to use the mirror correctly?

Look at the mirror every time you stop or start, overtake, turn, merge, change lanes, stop.

Check the position of the mirror every 5-8 seconds.

Check the mirrors and re-adjust each time you sit in the driver's seat (if necessary)

In the case of irregular traffic and heavy traffic, look at the rear view mirrors more often. Rear view mirrors will help you drive safely in difficult driving situations.

If your mirror has anti-glare, consider turning on the mirror at night to reduce the glare from the headlights behind you.

With these settings and instructions, you shouldn't have any blind spots. Try to test your blind spot while driving to see if the car can seamlessly transition from the rear view mirror to the side view mirrors.

Always check the mirrors before driving. You never know if they are being moved, or if you were sitting in a different position after driving last time.

Remember that even a perfectly positioned mirror can sometimes eliminate all blind spots. Be sure to check your shoulders before doing any lateral movement.

JoyTutus Side Rear View Mirror is a good choice for Jeep Wrangler.

Stop hesitate and click on the picture to purchase it.

Search on for more mirrors experience.
By JiaZhuo